Change Your Pin - MGI Navigator G800 Instruction And Service Manual

15. Top Box control features
On/Off- Press the on/off button to turn the buggy on and off
Speed Control- Turn the speed control clockwise to set the desired speed [S1 to S9-the higher the
number the higher the speed] and press the speed control to start the buggy. To accelerate speed,
turn the speed control clockwise. To slow the buggy down, turn the speed control anti-clockwise.
To stop the buggy, press the speed control.
The speed setting is red when the buggy is stopped and white when the buggy is moving.

16. Change your PIN

The default PIN on your buggy is 1111. The buttons are numbered as per the diagram. To change
your PIN go to Sureshot Homepage > Features > Buggy/Remote > Maintenance > Change PIN
17. Set your local time
Your G Series buggy has a real time clock which sets the time using satellites. Ensure you are
outside and receiving GPS signal.
Go to Sureshot Homepage > Features > Setup > Date/Time > Set Local Time. To manually
change the time use the up/down keys. Use the left/right keys to change between hours and
minutes.
12