Folding; Fourth Foldable Rear Wheel; Gps Holder And Top Handle Compartment; Inverting Rear Wheels - MGI zip X5 User Manual

3.4 Folding

Step 1: Disconnect the battery. It
can left on or removed from the
buggy.
Step 2: Open the fold lever
to release the handle.
Step 3: Pull up the latch at the
bottom of the handle.
Step 4: Lower the handle down flat.
Step 5: Move the Top Bag Support
down so that it locks over the front
wheel assembly.
Step 6: Close the fold lever to lock
the handle into place.
08

3.5 Fourth Foldable Rear Wheel

The MGI ZIP X5 comes standard with a fourth foldable rear wheel.
This wheel MUST be unfolded into position at all times when
the buggy is in use. This will reduce damaging the buggy, and
provide the ultimate in stability across all terrains. This fourth wheel
should be cleaned regularly with a cloth to ensure it can be
folded as required for storage.

3.6 GPS Holder and Top Handle Compartment

In the top handle compartment there is a position for a GPS/
mobile device holder. Open the compartment and connect the
holder into position. To open the holder always press the button
at the top of the holder. Place the GPS into the cradle, then close
the holder by squeezing the two sides closer together.

3.7 Inverting Rear wheels

The rear wheels can be inverted on the axle to reduce the size of
the buggy when folded.
MGI ZIP X5 User Manual 09