Fitting The Battery - MGI Navigator G800 Instruction And Service Manual

LED Indicator
-The Red LED illuminates to indicate the charger is power on.
-The Yellow LED indicates the battery is charging.
-The LED will turn Green when the battery is fully charged.
-The LED will flash Green when the battery is on float charge.
-The 24v lithium ion charger will power off automatically after being on float charge for 18 hours.

3. Fitting the battery

Once charged, the battery can be fitted to the buggy. The battery is in a plastic case with lift assist
moulding and fused battery leads.
a. Place your battery in the tray with the leads facing to the front of the buggy.
b. Ensure the white dots on fused battery lead connection are aligned with the
battery tray
c. The battery lead can now be connected to the battery tray. Connect blue to blue and
black to black for 24v Li battery
4. Battery Lead Fuse
Your battery has a 30 amp fuse connected to the battery lead. The 30 amp fuse helps protect the
buggy's control board against a power surge.
An extra fuse is supplied with your buggy.
In the unlikelihood of your buggy stopping, the reason could be the fuse has blown. Check and
replace if necessary.
The replacement of the fuse will allow you to continue using your buggy. If the fuse blows, contact
your service centre.
7