Charge the battery [section 4.0] Speed Control – Manually and Remotely Keypad Unlock and Lock Remote Range and Safety Stop For Customer Support, please contact MGI directly Pairing a Remote for immediate and professional advice. Gyroscope Straight Tracker Navigation System Email: salesusa@mgigolf.com...
Assist us to contact you with any updates to your caddy To register your caddy, visit www.mgigolf.com You will need to record your MGI serial number. This is found on the caddy battery base or in the top box compartment.
3.2 Rear Wheels Positions 3.3 Unfolding The MGI ZIP caddy is designed to allow the rear wheels to be in Please see below two positions. The position is determined by where the wheel is the steps to unfold locked on the axle in either of the two grooves [see picture]. The a ZIP Caddy Handle.
3.4 Folding 3.5 Fourth Foldable Rear Wheel The MGI Zip Navigator comes standard with a fourth foldable and extendable rear wheel. This wheel MUST be unfolded and extended into position at all times when the caddy is in use. This Step 1: Disconnect the battery.
• Plug the charger output connection into the connector on • Before using your MGI ZIP caddy for the first time you must the front of the battery - the Red LED illuminates to indicate fully charge the battery overnight.
Distance Total: cannot be reset as it is the Odometer for the life of The desired speed can be altered up or down while the caddy. This feature will assist with service reminders which are the caddy is moving. recommended at each 500kms or 6 months periods. MGI ZIP Navigator User Manual...
7.1 Charging Your Remote Control feature on the MGI ZIP caddy. Before you start using your ZIP Navigator you must fully charge the remote control internal lithium ion battery for approximately To disable the distance recording feature, simply hold down the 6 hours or overnight using the USB cord provided.
Please note, the top left unlock button will flash every 3 seconds while the caddy is running under remote control. *MGI or an authorized service center will repair or replace any parts found to be defective in materials or workmanship under 7.8 Pairing a Remote...
It is the owner’s responsibility to ensure that all periodical checks, and labor. If the work to be carried out is part of warranty, MGI will necessary adjustments and services are carried out. If in doubt bear the cost.
Australian and New Zealand. You purchase. Please keep this with you as well as your Serial number can also call MGI Head office using any of the contact details. you can record in this manual. It is most important you register See Section 13.0 for details.
Page 13
MGI Service Center 629 South Cleveland Street Oceanside California 93054 SALES: 855 434 5111 SERVICE CENTER: 760 966 1566 E: salesusa@mgigolf.com Follow us on Absolute attention has been taken to ensure this manual is correct at time of printing. Specifications, images and statistics may change at any time.