Folding; Fourth Foldable Rear Wheel; Gps Holder And Top Handle Compartment; Inverting Rear Wheels - MGI Zip Navigator User Manual

3.4 Folding

Step 1: Disconnect the battery. It
can be left on or removed from the
buggy.
Step 2: Open the fold lever
to release the handle.
Step 3: Pull the latch up at the
bottom of the handle.
Step 4: Lower the handle until flat.
Toggle
Step 6: Close the fold lever to lock
the handle into place.
08

3.5 Fourth Foldable Rear Wheel

The MGI Zip Navigator All Terrain comes standard with a fifth
foldable and extendable rear wheel. This wheel MUST be unfolded
and extended into position at all times when the buggy is in use.
This will reduce damage to the buggy, and provide the ultimate
stability across all terrains. This fifth wheel should be cleaned
regularly with a cloth to ensure it can be folded and retracted as
required for storage.

3.6 GPS Holder and Top Handle Compartment

In the top handle compartment there is a position for a GPS/
mobile device holder. Open the compartment and connect the
holder into position. To open, press the button at the top of the
holder. Place the GPS into the cradle, then close the holder by
squeezing the two sides closer together.
Step 5: Push the
toggle down on the
top bag support and

3.7 Inverting Rear Wheels

then move the top
The rear wheels can be inverted on the axle to reduce the size of
bag support down so
the buggy when folded.
that it locks over the
front wheel assembly.
MGI Zip Navigator User Manual 09