Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for MGI Hunter Quad
Summary of Contents for MGI Hunter Quad
- Page 1 User Manual VERSION 1.1...
-
Page 2: Table Of Contents
Assembling Your Buggy Attaching the Front Wheels Attaching the Rear Wheels Rear Wheel Positions Unfolding Thank you for purchasing the MGI Quad Folding series motorised buggy. To get the most Positioning the Seat Positioning the Sand Bucket Loop out of your buggy please follow these Attaching the Umbrella Holder quick steps before use. -
Page 3: Registration
You can test the wheel is in position by pulling firmly on the wheel. It should not move out of position. You will need to record your MGI serial number. This is found under the battery tray. -
Page 4: Rear Wheel Positions
3.3 Rear Wheels Positions 3.4 Unfolding The MGI Quad buggy is designed to allow the rear wheels to be in two positions. The position is determined by where the wheel is locked on the axle in either of the two grooves [see picture]. The drive position is used during the normal operation of the buggy. -
Page 5: Folding
Step 3: You can now insert the seat into the bracket. IMPORTANT: Depress the seat with your hand before sitting. Do not use the seat on uneven surfaces. MGI does not warranty Step 1: Open the fold lever 2 any seat support brackets that are damaged or bent. -
Page 6: Attaching The Umbrella Holder
4.0 Battery Care the charger connected to the battery with power on. Looking after your battery during play and travel 4.1 Before using your MGI Quad buggy for the first time you must fully charge your battery overnight. • During play, minimise the drain on the battery by avoiding taking your buggy into the rough whenever possible. -
Page 7: Battery Fuse
This is the position for unlocked. 2) Locked position is best when using the Controlled Distance Function. In the picture the two blue components are now manually moved apart. Left Bolt Right Bolt MGI Hunter™ Quad User Manual... -
Page 8: Front Wheel Maintenance
6.3 Front Wheel Maintenance 8.0 Operating the Digital Top Box During the life of the MGI Quad buggy, you may experience wearing of the front wheel gasket. This may result in a noise 1. Control button 1 coming from the front wheel during use. You can replace this 2. -
Page 9: Units Measurements
Controlled Distance Function [CDF] The CDF enables the MGI Quad buggy to be sent a preset distance before the buggy auto stops. To use this function: It is recommended that you lock the front wheels to ensure the buggy tracks in a straight line. -
Page 10: Integrated Solar Charging
Duration of this warranty is: maintenance schedule, the owner will be charged for the parts and labour. If the work to be carried out is part of warranty, MGI • 2 years on parts* will bear the cost. -
Page 11: Upper And Lower Bag Strap Maintenance
It is the owner’s responsibility to ensure that all periodical checks, necessary adjustments and services are carried out. If in doubt Replace fused SLA please contact the MGI service centre on 1300 644 523. Any work BO/SC battery leads performed on your buggy should be recorded on your service record (see page 5) regardless of the work. -
Page 12: Service And Repair Centres
6 month inspection Date: Serviced by: of purchase. Invoice #: Signature: MGI offers the largest network of Service Centres in Australia and New Zealand. To find your nearest Service centre visit 1 year inspection Date: Serviced by: www.mgigolf.com Invoice #:... - Page 13 Q: Why does my MGI Quad buggy no longer have a lower bag strap? A: The MGI Quad buggy has been designed so the lower bag strap is no longer required. If you would prefer one for personal reasons, the lower bag strap is included with the spare parts when the buggy was purchased Q: I would like to have my MGI Quad buggy serviced.
- Page 14 MGI Hunter™ Quad User Manual...
- Page 15 MGI Golf P: +61 3 8872 6700 E: sales@mgigolf.com Follow us on...