Folding; Fourth Foldable Rear Wheel; Gps Holder And Top Handle Compartment; Inverting Rear Wheels - MGI Zip Series User Manual

3.4 Folding

Step 1: Disconnect the battery by
lifting the battery handle. It can be
left on or removed from the Zip X5.
Step 2: Open the fold lever
to release the handle.
Step 3: Pull up the latch at the
bottom of the handle.
Step 4: Lower the handle down flat.
Toggle
Step 6: Close the fold lever to lock
the handle into place.
08

3.5 Fourth Foldable Rear Wheel

The MGI Zip X5 comes standard with a fourth foldable rear wheel.
This wheel MUST be unfolded into position at all times when the
Zip X5 is in use. This will reduce damaging the Zip X5, and provide
the ultimate in stability across all terrains. This fourth wheel should
be cleaned regularly with a cloth to ensure it can be folded as
required for storage.

3.6 GPS Holder and Top Handle Compartment

In the top handle compartment there is a position for a GPS/
mobile device holder. Open the compartment and connect the
holder into position. To open the holder always press the button
at the top of the holder. Place the GPS into the cradle, then close
the holder by squeezing the two sides closer together.
Step 5: Push the

3.7 Inverting Rear wheels

toggle down on the
The rear wheels can be inverted on the axle to reduce the size of
top bag support and
the Zip X5 when folded. To invert the rear wheels, press the grey
then move the Top
release button on the wheels hub and remove from the axle. Invert
Bag Support down so
the rear wheels so that the wheels hub protrudes away from the
that it locks over the
axles. Press the grey release button on the wheels hub and release
front wheel assembly.
once the wheel is fitted onto the axle.
MGI Zip X5 User Manual 09