Fourth Foldable Rear Wheel; Gps Holder And Top Handle Compartment; Inverting Rear Wheels - MGI zip Series User Manual

3.5 Fourth Foldable Rear Wheel

The MGI Zip Navigator comes standard with a fourth foldable and
extendable rear wheel. This wheel MUST be unfolded and extended
into position at all times when the Zip Navigator is in use. This will
provide the ultimate stability across all terrains. This fourth wheel should
be cleaned regularly with a cloth to ensure it can be folded and
retracted as required for storage.

3.6 GPS Holder and Top Handle Compartment

In the top handle compartment there is a position for a GPS/mobile
device holder. Open the compartment and connect the holder into
position. To open, press the button at the top of the holder. Place the
GPS into the cradle, then close the holder by squeezing the two sides
closer together. To remove, gently push the GPS Holder up and away
from the Navigator

3.7 Inverting Rear Wheels

The rear wheels can be inverted on the axle to reduce the size of the
Zip Navigator when folded. To invert the rear wheels, press the grey
release button on the wheels hub and remove from the axle. Invert the
rear wheels so that the wheels hub protrudes away from the axles.
Press the grey release button on the wheels hub and release once the
wheel is fitted onto the axle.
MGI Zip Navigator User Manual 09