Battery Charging & Connection; Initial Charge; Connecting The Battery Onto The Buggy; Charging The Battery After Use - MGI zip Series User Manual

4.0 Battery Charging & Connection
The Zip X4 is designed to take either Zip battery:
• MGI 24v 250Wh Lithium battery [Standard]
• MGI 24v 380Wh Lithium battery [Optional]

4.1 Initial Charge

• Before using your MGI Zip buggy for the first time you must
fully charge the battery overnight.
• Plug the charger AC lead into a powerpoint - the green LED
illuminates to indicate the charger is on.
• Plug the charger output connection into the connector on
the front of the battery - the red LED illuminates to indicate it
is charging.
• When the charging LED indicator has turned green, the
battery is fully charged and ready for use.
Please refer to the battery charger user manual for further
information.

4.2 Connecting the Battery onto the Buggy

Position the battery on the buggy and push the battery down
to secure it.
Push the handle down to connect the battery to the buggy.
Your buggy has been equipped with a fail safe battery
connection, so the buggy will not move when you connect
the battery. Your buggy will only start once the speed control is
switched on.
10

4.3 Charging the Battery after use

• Disengage the battery by lifting the handle.
• The battery can be left on or removed from the buggy for
charging.
• Plug the charger AC lead into a powerpoint - the green LED
illuminates to indicate the charger is on.
• Plug the charger output connection into the connector on
the front of the battery - the red LED illuminates to indicate
charging.
• When the charging LED indicator has turned green, the
battery is fully charged and ready for use.

5.0 Fitting the Golf Bag

Ensure that the top bag support straps are disconnected.
Position the golf bag on the buggy.
Secure the top bag support strap
• Select a good position for the elasticised straps to be put
around the golf bag.
• Stretch the longer end of the strap and loop the rounded
plastic bar underneath the hook on the shorter end.
• The top bag support straps should now be connected.
Please ensure the top bag support straps are hooked in place
securely before releasing. Failure to do so could result in injury to
the user.
Adjusting the length of the top bag support strap
The rounded plastic bar on the longer strap can be adjusted to
ensure the bag is securely in place.
Secure the lower bag strap and pull the lower bag strap over the
base of the golf bag.
MGI Zip X4 User Manual 11