Charging The Battery After Use; Fitting The Golf Bag - MGI zip Series User Manual

Hide thumbs Also See for zip Series:
Table of Contents

Advertisement

4.3 Charging the Battery after use

• Disconnect the battery by lifting the handle.
• The battery can be left on or removed from the Zip Navigator
for charging.
• Plug the charger AC lead into a power outlet - the green LED
illuminates to indicate the charger is on.
• Plug the charger output connection into the connector
on the front of the battery - the red LED illuminates to indicate
charging.
• When the charging LED indicator has turned green, the
battery is fully charged and ready for use.
*The Zip Navigator AT battery MUST be charged after every use.
Failure to do so maybe damage the battery.
5.0 Fitting a Golf Bag
Ensure that the top bag support straps are disconnected.
Position the golf bag on the Zip Navigator.
Secure the top bag support strap
• Select a good position for the elasticised straps to be put
around the golf bag.
• Stretch the longer end of the strap and loop the rounded
plastic bar underneath the hook on the shorter end.
• The top bag support straps should now be connected.
Please ensure the top bag support straps are hooked in place
securely before releasing. Failure to do so could result in injury to
the user.
Adjusting the length of the top bag support strap
The rounded plastic bar on the longer strap can be adjusted to
ensure the bag is securely in place.
Secure the lower bag strap and pull the lower bag strap over the
base of the golf bag.
MGI Zip Navigator User Manual
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zip navigator

Table of Contents