Fitting The Battery; Battery Lead Fuse - MGI Ryder R75 Instructions/Service Manual

LED Indicator
-The Red LED illuminates to indicate the charger is power on.
-The Yellow LED indicates the battery is charging.
-The LED will turn Green when the battery is fully charged.
-The LED will flash Green when the battery is on float charge.
-The 12v SLA charger will power off automatically after being on float charge for three
hours. The 12v lithium ion charger will power off automatically after being on float charge
for 18 hours.

3. Fitting the battery

Once charged, the battery can be fitted to the buggy. The battery comes with a battery
cover, carry handle and battery leads.
a. Place your battery in the tray with the leads facing to the front of the buggy.
b. Ensure the white dots on fused battery lead connection are aligned with the
battery tray
c. The battery tray has a battery securing strap.
d. The securing strap is to be used at all times as it protects your battery against
damage from falling out.
e. The battery lead can now be connected to the battery tray. Connect red to red
and black to black for SLA battery or blue to red and black to black for lithium.

4. Battery Lead Fuse

Your battery has a 30 amp fuse connected to the battery lead. The 30 amp fuse helps
protect the buggy's control board against a power surge.
An extra fuse is supplied with your buggy.
7