Battery Charging & Connection; Initial Charge; Connecting The Battery Onto The Caddy; Charging The Battery After Use - MGI ZIP series User Manual

4.0 Battery Charging & Connection
The ZIP X5 is designed to take either ZIP battery:
• MGI 24v 250Wh Lithium battery [Standard]
• MGI 24v 380Wh Lithium battery [Optional]

4.1 Initial Charge

• Before using your MGI ZIP caddy for the first time you must
fully charge the battery overnight.
• Plug the charger AC lead into a power point - the Green LED
illuminates to indicate the charger is power on.
• Plug the charger output connection into the connector on
the front of the battery - the Red LED illuminates to indicate
charging.
• When the charging LED indicator has turned green, the
battery is fully charged and ready to be used.
Please refer to the battery charger user manual for further
information.

4.2 Connecting the Battery onto the Caddy

Position the battery on the caddy and push the battery down to
secure it.
Push the handle down to connect the battery to the caddy.
Your caddy has been equipped with fail safe battery connection,
so the caddy will not move when you connect the battery. Your
caddy will only start once the speed control is switched on.
10

4.3 Charging the Battery after Use

• Disconnect the battery by lifting the handle.
• The battery can be left on or removed from the caddy for
charging.
• Plug the charger AC lead into a power point - the Green LED
illuminates to indicate the charger is power on.
• Plug the charger output connection into the connector on
the front of the battery - the Red LED illuminates to indicate
charging.
• When the charging LED indicator has turned green, the
battery is fully charged and ready to be used.

5.0 Fitting the Golf Bag

Ensure that the top bag support straps are disconnected.
Position the golf bag on the caddy.
Secure the top bag support strap
• Select a good position for the elasticized straps to be put
around the golf bag
• Stretch the longer end of the strap and loop the rounded
plastic bar underneath the hook on the shorter end
• The top bag support straps should now be connected.
Please ensure the top bag support straps are hooked in place
securely before releasing. Failure to do so could result in injury to
the user.
Adjusting the length of the top bag support strap
The rounded plastic bar on the longer strap can be adjusted to
ensure the bag is secured properly in place.
Secure the lower bag strap
Pull the lower bag strap over the base of the golf bag
MGI ZIP X5 User Manual 11