Dürkopp Adler 650-16 Operating Instructions Manual page 97

Controller with the OP7000 control panel
MAN mode Setting the fullness
Operating Instructions 650-16 - 01.0 - 06/2014
The following table lists the symbols and buttons for manually
setting the fullness.
Symbols/buttons
1. Select the type of fullness.
 The type of fullness selected is displayed in an activated
control field within the symbol.
2. If a higher or lower degree of fullness is required, use the arrow
keys to display more buttons.
3. Input the fullness using the buttons 0 to 16.
Meaning
Inputting the fullness
The fullness setting is displayed by
a button highlighted in red.
Select the type of fullness:
• Upper (upper transport)
• Lower (lower transport)
The fullness selected is displayed in an
activated control field.
Display of further buttons for inputting the
fullness. The buttons 0 to 16 are available
for input.
95