Dürkopp Adler 650-16 Operating Instructions Manual page 33

Operation
Operating Instructions 650-16 - 01.0 - 06/2014
Inserting a full bobbin
1. Insert the full bobbin (3) into the bobbin housing upper
section (7).
2. Feed the hook thread through the slot (4) under the tensioning
spring (5) into the hole (6).
3. Pull the hook thread approx. 5 cm out of the bobbin
housing (7).
4. The bobbin must rotate in the direction of the arrow when pull-
ing out the thread.
5. Insert the bobbin housing (7) again.
6. Push the hook cover (2) upwards.
31