Dürkopp Adler 650-16 Operating Instructions Manual page 74
Hide thumbs
Also See for 650-16:
- Operating instructions manual (150 pages) ,
- Operating manual (80 pages)
Table of Contents
Advertisement
72
Symbol
Meaning
Right sleeve / left sleeve
The machine can sew only right sleeves, only left
sleeves, or right and left sleeves alternately
• Use
(if programs exist for both).
Steps
Number of steps contained in the current program.
Stitch length
Value range: 1.0 to 5.5 mm
The stitch length can be altered before starting sewing.
The altered value applies throughout the entire sewing
program.
• Use
• Use
Thread tension
Value range: 1 to 99
The thread tension can be altered before starting
sewing.
The altered value applies throughout the entire sewing
program.
Use
• Use
Other parameters
Foot Press. (presser foot pressure)
Fulln.Corr. (fullness correction)
• Use
parameter.
• Press the "OK" key.
• Use
presser foot pressure.
• Select the parameter using the "OK" key.
• Change values using
• Click on the "OK" button to confirm.
• Press
Controller with the OP3000 control panel
/
to select a right sleeve or a left sleeve
/
to select the "Stitch length" parameter.
/
to adjust the stitch length.
/
to select the "Thread tension" parameter.
/
to change the thread tension
/
to select the "Other parameters"
/
to select the fullness correction or the
or "ESC" to exit the menu.
Program bar
Length per step in mm,
or a dash (-) if no automatic step
progression
Operating Instructions 650-16 - 01.0 - 06/2014
/
.
Advertisement
Table of Contents
