About This Manual - Huawei Quidway S3000-EI Series Installation Manual

About This Manual

Release Notes
The corresponding product version of this manual is VRP3.10.
Related Manuals
The related manuals are listed in the following table.
Quidway S3000-EI Series Ethernet
Switches Operation Manual
Quidway S3000-EI Series Ethernet
Switches Command Manual
Organization
Quidway S3000-EI Series Ethernet Switches Installation Manual mainly introduces the
hardware features, installation, configuration and maintenance of S3000 EI Series
Ethernet Switches. To avoid any possible device damage and personal injury before
the installation and during the installation, please read the manual carefully. The
manual consists of the following chapters.
Chapter 1 Product Introduction
The chapter gives a brief introduction to S3000-EI Series Ethernet Switches.
Chapter 2 Installation Preparation
The chapter introduces such topics as the environmental requirements of S3000-EI
Series Ethernet Switches, the instructions for the installation, the installation tools and
so on.
Chapter 3 Installation
The chapter introduces the installation of the S3000-EI Series Ethernet Switches,
module installation, connections of the power cable, ground wire and the console
cable.
Manual Content
Introduces such modules as getting started, port, VLAN,
network protocols, multicast protocols, QoS/ACL,
integrated management, 801.x, and system management.
Introduces the commands of such modules as getting
started, port, VLAN, network protocols, multicast protocols,
QoS/ACL, integrated management, 801.x, and system
management.