10/100/1000Base-T Module; Module Panel And The Indicators - Huawei Quidway S3000-EI Series Installation Manual

Installation Manual
Quidway S3000-EI Series Ethernet Switches
Table 7-6 Interface attributes of 1000Base-LX GL module
Connector
Number of connectors
Transmission medium and
maximum transmission distance
Compliant standard
Central wavelength
Transmitting optical power
Receiving sensitivity

7.4 10/100/1000Base-T Module

10/100/1000Base-T module provides a 1000Base-T interface which running in
full-duplex mode and supporting 10M, 100M, 1000M speed negotiation and
MDI/MDI-X auto-sensing and fully compliant with IEEE 802.3ab 1000Base-T.
Table 7-7 10/100/1000Base-T module interface attributes
Connector
Function
Transmission medium and
maximum transmission distance

7.4.1 Module Panel and the Indicators

10/100/1000Base-T module panel is illustrated in the following figure.
1000BASE-T
GT MODULE
Figure 7-7 10/100/1000Base-T module panel
The descriptions of panel indicators are as follows:
Table 7-8 Meaning of indicators on 10/100/1000Base-T module panel
Indicator
LINK
ACTIVE
Attribute
LC
1
9/125µm Single Mode optical fiber with a maximum transmission distance
of 40km.
IEEE 802.3 z
1550nm
-5.0dBm to 0dBm
-21dBm
Attribute
RJ-45
Category-5 twisted pair cabling. A maximum transmission distance of 100m
is supported
LINK
ACTIVE
Off means that the line is disconnected. On means the line is connected.
Off means that no data is being received or sent. Blinking means data is being received or sent.
Chapter 7 Optional Interface Modules
Description
Description
1000M full-duplex
100M full-duplex
10M full-duplex
MDI/MDI-X auto-sensing
Status description
7-6