Rear Panel - Huawei Quidway S3000-EI Series Installation Manual

Installation Manual
Quidway S3000-EI Series Ethernet Switches
III. Fixed 100M Ethernet port on the front panel
Table 1-6 Attribute of the fixed 100M Ethernet port on the front panel of S3026C Switch
Connector
Interface number
Operating mode
Compliant standard
Transmission medium and
maximum transmission distance
IV. Console port
S3026C Switch provides a Console port compliant with EIA/TIA-232 asynchronous
serial criterion. Users can perform local or remote configuration of the switches via
this port.
Table 1-7 Console port attributes
Attribute
Connector
Standard of
interface
Baud rate
Services supported

1.3.2 Rear Panel

I. S3026C Switch rear panel
Rear panel layouts
You can find AC socket, grounding screw, and redundant power socket on the rear
panel of S3026C Switch. See the figure below.
AC power Grounding screw AC power Grounding screw
Figure 1-5 S3026C Switch rear panel
AC power input range
100 to 240V, 50/60Hz AC. Tolerance range: ±10%
Attribute
RJ-45
24
IEEE 802.3u
Category-5 twisted pair cabling with a maximum transmission distance of
100m.
RJ-45
Asynchronous EIA/TIA-232
9600bps ( by default )
Connect with character terminal
Connect with the serial port of a local terminal (which can be a PC) or a remote
terminal (through a pair of Modems) and run terminal emulation program on a
terminal.
Redundant power input Redundant power input
Description
10M half-/full-duplex
100M half-/full-duplex
MDI/MDI-X auto-sensing
Description
1-6
Chapter 1 Product Introduction