Huawei Quidway S3000-EI Series Installation Manual page 44

Installation Manual
Quidway S3000-EI Series Ethernet Switches
Note:
The boot display may change according to different switches. The display of S3026C Switch is shown in
the following example.
starting....
Copyright(C) 2000-2002 by HUAWEI TECHNOLOGIES CO.,LTD.
Creation date: Dec 16 2002, 16:57:31
CPU type
CPU Clock Speed : 200Mhz
BUS Clock Speed : 33Mhz
Memory Size
S3026R001 main board self testing.....................
SDRAM fast test..........................................OK! (2)
FLASH fast test..........................................OK! (3)
CPLD test................................................OK! (4)
Port g1/1 has 1000BASE-SX MM module
Port g2/1 has 1000BASE-T GT module
Switch chip test.........................................OK! (7)
PHY test.................................................OK! (8)
Please check port leds.............................finished! (9)
Switch SDRAM fast test...................................OK! (10)
Switch MAC address:
Press Ctrl-B to enter Boot Menu... 5 (12)
Line (1) through line (11) are self test information of the system.
Line (5) and (6) are the information about the optional modules installed on the rear
panel and can be different for different modules.
Line (12) asks if the user will enter the BOOT menu and prompts 5 seconds of
waiting.
Press <Ctrl+B> within 5 seconds and enter the BOOT menu.
If you perform no operation or press other keys other than <Ctrl+B> within the 5
seconds of waiting, the system will enter the auto-booting state when the time
prompt for instruction waiting becomes 0.
************************************************
*
* Quidway S3026 BOOTROM, Version 102
*
************************************************
: MPC8241
: 64MB
00-BF-FF-BF-FF-BF
Chapter 4 Powering on Switch for the First Time
4-6
*
*
*
(1)
(5)
(6)
(11)