1000Base-Zx Module - Huawei Quidway S3000-EI Series Installation Manual

Installation Manual
Quidway S3000-EI Series Ethernet Switches
Table 7-2 Interface attributes of 1000Base-SX/LX module
Connector
Number of connectors
Transmission medium and
maximum transmission distance
Compliant standard
Central wavelength
Transmitting optical power
Receiving sensitivity
Caution:
When connecting the fiber optic, pay attention to the following:
1) Do not bend the fiber optic overly.
2) Correctly connect the Tx and Rx ends of the module interface.
3) Ensure the cleanness at the interface of the fiber optic.

7.2 1000Base-ZX Module

Caution:
1) In the case that the optical interface does not connect with an optical connector or the dust-proof cap
is removed, it is possible for invisible rays to emit from this optical interface. Therefore, do not stare at
the optical interface.
2) If no optical connector is installed in the optical interface, make sure a dust-proof cap is placed on it.
3) Before connecting the optical fiber, make sure the connector matches the adopted optical fiber.
1000Base-ZX module provides one GE optical interface and uses Single Mode fiber
with a maximum transmission distance of 70km.
Attribute
SC
1
9/125µm Single Mode optical fiber with
a maximum transmission distance of
10km.
62.5/125µm Multi-mode optical fiber
with a maximum transmission distance
of 550m.
50/125µm Multi-mode optical fiber with
a maximum transmission distance of
550m.
IEEE 802.3 z
1300nm
-9.5dBm
-20dBm
Chapter 7 Optional Interface Modules
Description
1000Base-LX module
850nm
-17dBm
7-3
1000Base-SX module
62.5/125µm Multi-mode
optical fiber with a maximum
transmission distance of
220m.
50/125µm Multi-mode optical
fiber with a maximum
transmission distance of
500m.