S3026G/S3026G-Dc Ethernet Switches; Front Panel - Huawei Quidway S3000-EI Series Installation Manual

Installation Manual
Quidway S3000-EI Series Ethernet Switches
Note:
S3026G and S3026G-DC Switches share similar structures, except for their power sockets. Unless
otherwise specified, S3026G is introduced as a representative.
For the same reason, S3026C is introduced as a representative of S3026C and S3026C-DC.
For the same reason, S3026T is introduced as a representative of S3026T and S3026T-DC.
For the same reason, S3026E FS is introduced as a representative of S3026E FS and S3026E FS-DC.
For the same reason, S3026E FM is introduced as a representative of S3026E FM and S3026E FM-DC.

1.2 S3026G/S3026G-DC Ethernet Switches

1.2.1 Front Panel

Note:
The front panels of S3026G and S3026G-DC Switches are exactly the same. This section introduces the
front panel of S3026G Switch as an example.
I. Front panel layouts
You can find the system state indicator, fixed Ethernet port indicator, 24 fixed
10Base-T/100Base-TX auto-negotiation Ethernet ports, 2 GBIC uplink ports, and
Console port located in order on the front panel of S3026G Ethernet Switch. See the
figure below.
24 100M electrical port state indicator 24 100M electrical port state indicator
100M electrical port state indicator 100M electrical port state indicator
Figure 1-1 S3026G Switch front panel
Note:
GBIC is a kind of hot-swappable data communication card.
S3026G Switch provides 2 GBIC interfaces. You can select gigabit modules, all of which are
hot-swappable.
Power indicator Power indicator
Mode switch button Mode switch button
24 100M electrical port 24 100M electrical port GBIC module GBIC module
slot slot
1-2
Chapter 1 Product Introduction
Quidway S3000 Series Quidway S3000 Series
GBIC module GBIC module
CONSOLE port CONSOLE port
slot slot