S3026C/S3026C-Dc Ethernet Switches; Front Panel - Huawei Quidway S3000-EI Series Installation Manual

Installation Manual
Quidway S3000-EI Series Ethernet Switches

1.3 S3026C/S3026C-DC Ethernet Switches

1.3.1 Front Panel

Note:
The layouts of the front panels of S3026C and S3026C-DC Switches are exactly same. This section will
introduce the front panel, taking S3026C Switch as an example.
I. Front panel layouts
You can find the system state indicator, fixed Ethernet port indicator, 24 fixed
10Base-T/100Base-TX auto-negotiation Ethernet ports, 2 optional module slots, and
Console port located in order on the front panel of S3026C Ethernet Switch. See the
figure below.
24 100M electrical port state indicator 24 100M electrical port state indicator
100M electrical port state indicator 100M electrical port state indicator
Figure 1-4 S3026C Switch front panel
II. Front panel indicators
The meanings of the indicators on the front panel of S3026C are described in the
following table.
Table 1-5 S3026C Switch front panel indicators
Indicator
System state indicator
Fixed Ethernet port
indicators
Power indicator
P o w e r i n d i c a t o r
Mode switch button Mode switch button
Panel indication
PWR
RPS
LNK
DUP
SPD
24 100M electrical port 24 100M electrical port Optional module Optional module
Status
On The switch is powered on.
Off The switch is powered off.
On Redundant power is working
Off Redundant power is not working
On/Blinking Data is being sent or received.
Off No data is being sent or received.
On Full-duplex mode
Off
Half-duplex mode
On 100M operating mode
Off 10M operating mode
1-5
Chapter 1 Product Introduction
Quidway S3000 Series Quidway S3000 Series
Optional module Optional module
slot slot
slot slot
CONSOLE port CONSOLE port
Description