Table of Contents
Advertisement
QUALIFIED
INSTALLER
6. Some vermiculite may be added outside the burner
on the platform if desired.
7. Place the rocks on the platform as shown below.
You can also place one or two rocks on the
vermiculite as shown.
Long Beach Driftwood Kit installed
Install Decorative Glass Murano
1510DGM
Material required
• Steel platform (supplied with appliance)
• Small container to distribute fi reglass (not included)
• Murano Glass Fire Kit, which contains:
◊ 1 bag of blue azura fi reglass
◊ 1 bag of black fi reglass
◊ 1 glass platform
IMPORTANT: Approved for use only with the fi reglass
provided with your Valor fi replace or the tempered
crushed fi reglass brands American Fireglass™ or
fi regear. The use of any other fi reglass products may
void your fi replace warranty.
40
Installation
CHOKING HAZARD! Ensure that the fi replace
area is clear of vermiculite particles as these could
be ingested by small children. Vacuum area after
installation.
Installation
Carefully unpack the kit.
1. Install the steel platform around the burner as
indicated. The openings in the platform should
be underneath. The edge of the burner protrudes
above the platform. Push the platform as far back as
possible to maximize the air gap behind the burner.
Installed platform
Top view—platform
WARNING
!
Gap behind burner
No gap in front of burner
Advertisement
Table of Contents
