Table of Contents
Advertisement
OWNER'S
INFORMATION
TO TURN APPLIANCE ON and OFF
• Press ON-OFF button once to light
pilot. Press again to shut of pilot.
TO ADJUST FLAME HEIGHT
• Press and hold large fl ame
button to gradually increase
fl ame height.
• Press and hold small fl ame
button to gradually decrease
fl ame height.
How to Turn Your Fireplace OFF
(including pilot)
Familiarize yourself with the wall
swich operation before using your
fi replace.
Press and hold the ON/OFF button
for a second.
If the fl ames are on, they go down
and you hear the valve motor wind
down. You hear a clunk and a beep
indicating that the valve has received
the signal from the control.
10
Owner's Information
How to Ensure Your Fireplace Cannot
Be Turned ON Inadvertently
You can use one of the two following methods to
ensure that your fi replace will not turn on when you
don't want it on.
First, ensure your fi replace is turned off—including
the pilot—and cold BEFORE going ahead.
• Turn the dial on the gas valve from the ON position
to the MAN position as shown. Turning the dial to
MAN (arrow up) will ensure that the main burner can
not come on. The pilot will remain on if it is lit.
• Alternately, remove all batteries from the battery box
or disconnect the battery box from the receiver.
The battery box, receiver and gas valve are located on
the bottom of the appliance behind the front panel.
Wall Switch
Gas valve
Window
Receiver Gas valve
Battery box
Advertisement
Table of Contents
