Table of Contents
Advertisement
Quick Links
This User's Guide contains information primarily specific to this computer, assuming that the user is able to perform basic Windows operations and
understands how to use help in its installed applications to resolve problems. In this user's guide, unless specified, "Windows" refers to Windows
10 Pro 64 bit system and "hard disk" refers to a hard disk or solid-state drive (SSD). Configuration and application installation should be conducted
by a user who has administrator privileges. If a [User Account Control] screen comes up, please be sure to confirm the contents before continuing.
The information contained within this manual applies to the following models:
• VB Model: VG23T/B-T
Note: For details about a model number, please see "Model number list" (p.23).
1
Checking Included Accessories.............................................2
2
Connecting Included Accessories .........................................2
3
Windows Setup ......................................................................3
4
Knowing the Parts..................................................................6
1
5
Battery....................................................................................8
6
Keyboard................................................................................9
7
NX pad (Touchpad) ................................................................9
8
Switching Display Outputs...................................................10
Note: The illustrations, screenshots, icons, and on-screen text shown in this document may differ from the ones you actually encounter.
User's Guide
VB Model
9
LAN Function....................................................................... 11
10
Wireless LAN Function ........................................................ 12
11
Memory ............................................................................... 13
12
System Configuration.......................................................... 14
13
Security Chip Function........................................................ 15
Applications......................................................................... 16
15
Recovery ............................................................................. 19
16
Appendix ............................................................................. 22
Advertisement
Table of Contents
Related Manuals for NEC VersaPro VB VG23T/B-T
Summary of Contents for NEC VersaPro VB VG23T/B-T
-
Page 1: Table Of Contents
User's Guide VB Model This User's Guide contains information primarily specific to this computer, assuming that the user is able to perform basic Windows operations and understands how to use help in its installed applications to resolve problems. In this user's guide, unless specified, "Windows" refers to Windows 10 Pro 64 bit system and "hard disk"... -
Page 2: Checking Included Accessories
Checking Included Accessories Connecting Included Accessories Checking that all included accessories are present Important points when connecting Please open up the box and check that all included items and accessories are there. • Do not touch connector terminals when connecting any items. Please immediately contact the place of purchase if any items happen to be missing or Failure to do so may cause damage. -
Page 3: Windows Setup
Preparation for setup Windows Setup During Windows setup, you are required to enter the name of the person who will be using the computer (user name). Please choose the name to be registered in advance. When you first power up your new computer, it is necessary to perform Windows setup. - Page 4 Press the power switch ( You cannot complete this step without entering the user name. Never turn off the power during Windows setup. Turning off the power switch or When the [Meet Cortana] screen is displayed, confirm the contents, and pulling out the power cord in the middle of this process may lead to damage.
- Page 5 Select [Yes] and then press <Enter>. Enter the desired volume size into the [Simple volume size in MB] box and click [Next]. The BIOS setup utility should now be finished and Windows will automatically restart. Confirm that [Assign the following drive letter] is selected and click [Next]. After this, please refer to "Setup Procedure"...
-
Page 6: Knowing The Parts
Explanation of Components Knowing the Parts Number Name Explanation LCD display This is the computer's display. Names and descriptions of your computer's major components Status LEDs These indicate various states of the computer. This is used to turn the computer on/off or Power switch ( ... - Page 7 Number Name Explanation Status LEDs (18) Internal microphone This can be used for video conferencing, etc. While you are using this microphone for Power LED recording, it is not possible to play back what you are recording through speakers at the same time. The power LED and battery recharge LED light orange for approximately 1 second at (19) USB port (supports...
-
Page 8: Battery
Battery pack installation Battery Please install the battery pack according to the following illustration. Guide • Never touch the battery slot terminals. It may cause contact failure. • Before installing or removing the battery pack, disable the "Fast Startup" function. For more detailed information, please refer to "Disabling the "Fast Startup"... -
Page 9: Keyboard
Keyboard NX pad (Touchpad) This section covers how to use the NX pad (touchpad) and configure extended Using the keys features. Using NX pad (touchpad) Hotkeys (Using <Fn>) The following operations can be performed with the NX pad (touchpad). By pressing the function key <Fn> in combination with another key, you can easily change common computer settings. -
Page 10: Switching Display Outputs
Configuring NX pad (touchpad) Switching Display Outputs Configuration of the NX pad (touchpad) buttons, pointer behavior, and extended features is done using the [Mouse Properties] window. Display outputs can be switched using the keyboard. Click [Start]. Click [Mouse Properties (Touchpad Clickpad Trackpad TrackPoint Mouse Do not use this operation if the external display is not connected. -
Page 11: Lan Function
This allows you to be able to remotely turn your computer's power on or wake it up from LAN Function sleep or hibernate from an administrator's PC when your computer has a LAN connection. This section covers important points and the correct procedure for setting up the LAN (Local Area Network) function. -
Page 12: Wireless Lan Function
Network booting function (PXE) Wireless LAN Function This enables booting via a network, and remote connection to your computer from an administrator's PC which allows you to do the following. Turning the wireless LAN on/off • Operating system installation The following methods can be used to turn the wireless LAN on and off. •... -
Page 13: Memory
Configuring the wireless LAN Memory The wireless LAN functionality can be configured with the [Power Management] tab Installing memory in Driver properties. Configuring the wireless LAN Before installing or removing memories, disable the "Fast Startup" function. For more detailed information, please refer to "Disabling the "Fast Startup" function" (p.22). The following explanation is for connecting to a wireless LAN access point that broadcasts its network name (SSID). -
Page 14: System Configuration
Align the notched part of the memory with the protrusion of the connector, System Configuration and insert the memory at an angle of approximately 30 degrees relative to the connector until the memory terminals click. When inserting the memory, these parts move The BIOS setup utility outward. -
Page 15: Security Chip Function
Restoring default factory setting values Security Chip Function Please follow these steps to restore your system to the default factory settings. Enter the BIOS setup utility. Outline Press the <F9> key. A confirmation screen should be displayed. Press the <Esc> button to cancel and exit. Confirm that [Yes] is selected and then press <Enter>. -
Page 16: Applications
For battery refresh and performance diagnostics, perform the following steps. When [Welcome to the Battery tool Setup Wizard] is displayed, click [Next]. If the [Battery tool Files in Use] screen is displayed, click [NEC Battery When performing battery refresh and performance diagnostics, the battery pack and Tool-Scheduler (Process Id:XXXX)], and then click [Continue]. - Page 17 When the restart prompt is displayed, remove the "Application Disc" from By using this method it is not guaranteed that the data on the hard disk cannot be the optical drive, follow the instructions on the screen, and then restart the completely recovered.
- Page 18 Function Details, Operation Method, and Limitations Help of HDD Active Protection System (Click on the start screen, and from the [Control Panel] of application screen, select [System and Security] [NEC - Airbag Protection], and click [Help] in the opened window.
-
Page 19: Recovery
Precautions during Recovery Recovery Follow the following precautions during recovery. Follow the steps in the manual and on the recovery screen Recovery Basics During recovery, be sure to follow the steps in this manual and on the recovery screen. Missing a step, pressing a key other than the indicated key, or changing the procedure may Here we will explain the basics before recovery. - Page 20 When the [Windows Recovery] screen is displayed, select [Start to restore Computer Recovery your computer]. If a recovery caution message appears again, read the message carefully Perform computer recovery. and select [Next]. There are two setup options: recovery using the "Recovery Disc", and that using the Windows function.
- Page 21 Click [Get started] on the [Reset this PC] option. Select [Recover from a drive]. Select a recovery method. Select one of the following recovery methods. • [Just remove my files] <For refreshing> • [Fully clean the drive] Click [Keep my files] on the [Choose an option] option. <For reset>...
-
Page 22: Appendix
After Recovery Appendix The applications which you installed from Application Disc or by any other way cannot be recovered. Reinstall them if needed. Disabling the "Fast Startup" function Depending on your usage environment, the drive letter or the path assigned before recovery might be different. - Page 23 Creating a recovery drive Specifications We recommend that a "recovery drive" be created for times when problems such as Model name VG23T/B-T corrupted files result in Windows not loading correctly. ® Intel Core i5-6200U processor Maximum memory (main 16 GB [SO-DIMM (1 slot)] memory) •...
- Page 24 In the event that the product is used for the above facilities and/or equipment or in control systems, etc. where personal injury and/or property damage is caused, NEC assumes no responsibility.