Vacuum Transport Belt (Vtb) Removal - Lexmark C78x Service Manual

5061

Vacuum transport belt (VTB) removal

See "Vacuum transport belt assembly" on page 7-11
1.
Remove the transfer plate assembly. See
2.
Remove the fuser bottom duct. See
3.
Remove the two front screws (A).
4.
Loosen belt (B) on redrive assembly, and remove from redrive gear.
5.
Remove belt from gear on vacuum belt transfer unit.
4-96
Service Manual
for the part number.
"Transfer plate assembly removal" on page
"Fuser bottom duct removal" on page
4-95.
4-46.