Nip relief handle removal
See
"Nip relief handle Also order cable tie parts packet (P/N 40X1648)" on page 7-17
1.
Remove the left lower cover to access the nip relief handle. See
page
4-24.
2.
Remove waste toner container.
3.
Reinsert paper tray into printer.
4.
Remove the broken pieces of old handle.
a.
Pull up the upper piece of handle to raise the nip relief link (A), and rotate upper piece of handle 90°
clockwise to free it from the nip relief link.
b.
Pull down the lower portion of the broken handle as far as it goes. Rotate the handle to slide off the
post.
for the part number.
"Left lower cover removal" on
Repair information
5061
4-65