Lexmark C78x Service Manual page 175
Hide thumbs
Also See for C78x:
- Reference manual (4 pages) ,
- Quick reference (4 pages) ,
- Service manual (474 pages)
Table of Contents
Advertisement
User attendance messages (continued)
User primary
Explanation
message
Serial <x>
A serial interface is the active communication link.
Setup Required check
Packing material was detected in one or more areas. Remove any remaining packing
<area name>
material.
Some held jobs were
not restored
Standard Bin Full
Remove the stack of paper from the bin to clear the message.
Submitting selection
Wait for the message to clear.
Tray <x> Empty
Load paper in the tray to clear the message.
Tray <x> Low
Add paper to the tray to clear the message.
Tray <x> Missing
Insert the tray into the printer.
Unlocking Printer
PIN entry is successful. Wait for the message to clear.
USB
The printer is processing data through the specified USB port.
USB <x>
USB device
Remove the USB device to clear the message.
unsupported
USB drive removed
USB hub unsupported Remove the USB device to clear the message.
View supplies
Displays the current level of all printer supplies.
Waiting
The printer has received a page of data to print, but is waiting for an End of Job
command, a Form Feed command, or additional data.
Waste Toner Life
Warning
1565 Emul Error
The printer automatically clears the message in 30 seconds, and then disables the
Load Emul Option
download emulator on the firmware card.
Download the correct download emulator version from the Lexmark Web site.
30 <color> toner
Install the specified toner cartridge, and close the front cover.
cartridge missing
31 Defective <color>
Replace the specified toner cartridge, and close the front cover.
cartridge
32 Replace
Remove the toner cartridge, and install a supported one.
unsupported <color>
cartridge
• Press
to clear the message and continue printing.
The printer frees memory by deleting the oldest held job and continues deleting
held jobs until there is enough printer memory to process the job.
• Cancel the current job.
• Wait for the message to clear.
• Insert the USB drive.
• Press
to print the contents of the buffer.
• Cancel the current job.
• Waste toner bottle is nearly full.
• Replace the waste toner bottle.
2-131
Diagnostic information
5061
Advertisement
Table of Contents
