Fan Locations - HP ProLiant DL580 Maintenance And Service Manual

114 HP ProLiant DL580 Generation 3 Server Maintenance and Service Guide
Online/Activity Fault/UID LED
LED (green) (amber/blue)
On, off, or Steadily blue
flashing
On Amber, flashing
regularly (1 Hz)
On Off
Flashing Amber, flashing
regularly (1 Hz) regularly (1 Hz)
Flashing Off
regularly (1 Hz)
Flashing Amber, flashing
irregularly regularly (1 Hz)
Flashing Off
irregularly
Off Steadily amber
Off Amber, flashing
regularly (1 Hz)
Off Off

Fan locations

The server is shipped with six system fans. Each fan is hot-swappable and
independently controlled. The fans are distributed into two zones to control
thermal conditions within the server.
Interpretation
The drive is operating normally, and it has been selected by a
management application.
A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.
The drive is online, but it is not active currently.
Do not remove the drive. Removing a drive may terminate
the current operation and cause data loss.
The drive is part of an array that is undergoing capacity
expansion or stripe migration, but a predictive failure alert has
been received for this drive. To minimize the risk of data loss,
do not replace the drive until the expansion or migration is
complete.
Do not remove the drive. Removing a drive may terminate
the current operation and cause data loss.
The drive is rebuilding, or it is part of an array that is
undergoing capacity expansion or stripe migration.
The drive is active, but a predictive failure alert has been
received for this drive. Replace the drive as soon as possible.
The drive is active, and it is operating normally.
A critical fault condition has been identified for this drive, and
the controller has placed it offline. Replace the drive as soon
as possible.
A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.
The drive is offline, a spare, or not configured as part of an
array.