Fan Locations - HP ProLiant ML30 Gen9 User Manual

Item LED
The blue Locate LED is behind the release lever and is visible when illuminated.
IMPORTANT:
The Dynamic Smart Array B140i Controller is only available in UEFI Boot Mode. It cannot be enabled in
Legacy BIOS Boot Mode. If the B140i controller is disabled, drives connected to the system board Mini-
SAS connectors operate in AHCI or Legacy mode. Under this condition:
• The drives cannot be a part of a hardware RAID or a logical drive.
• The Locate, Drive status, and Do not remove LEDs of the affected drives are disabled.
Use BIOS/Platform Configuration (RBSU) in the UEFI System Utilities to enable or disable the
B140i controller (System Configuration, BIOS/Platform Configuration (RBSU), System Options, SATA
Controller Options, Embedded SATA Configuration).

Fan locations

Fan number
1
2
16 Fan locations
Status
Flashing amber
Solid amber
Off
Fan type
System fan
Front PCI fan (optional)
Definition
The drive is not configured and predicts the drive
will fail.
The drive has failed.
The drive is not configured by a RAID controller.