Removing a media drive blank
1. Power down the server ("Powering down the server" on page 18).
2. Use the T-15 Torx screwdriver to eject the drive blank, and pull the drive
blank out of the server.
To replace the component, reverse the removal procedure.
Removing a media drive
To remove the DVD drive, optional diskette drive, or optional CD-RW drive:
1. Power down the server ("Powering down the server" on page 18).
2. Use the T-15 Torx screwdriver to eject the drive, and pull the drive out of the
server.
NOTE: The T-15 Torx screwdriver is shipped with the server and
can be located on the rear panel ("Rear panel components" on page
98).
Removal and replacement procedures
23