RAID BBU 1/31/2009 spare to Li-Ion version; updated SSD spare information; replaced Intel references with Kontron references. Removed MM# references from Kontron products. Noted 5/13/2009 discontinuance of AXXBASICRAIL and AXXHERAIL. Removed MM# references from Intel-sourced SKUs. All 6/29/2009 SKUs are now orderable directly from Kontron.
Page 3
Table of Contents INTRODUCTION ....................4 ORDERING NSC2U SYSTEM SKUS ..............5 III. ORDERING NSC2U SPARES/ACCESSORIES ..........10 QUAD PORT BYPASS NIC CAPABILITY ............13 APPENDIX A. RACK MOUNTING OPTIONS FOR 1U AND 2U COMMUNICATIONS RACK MOUNT SERVERS .................... 15 12/20/2010 v 3.3...
I. Introduction Product Description: The IP Network Server NSC2U system is the second generation product of 2U IP Network Server products, having long product life and 20-inch depth chassis. This server combines network port density and processor performance in a compact 2U ®...
NSCD0202W Base Model 0 with DC Power Supply See the NSC2U Base Model 0 Configuration table further down in this section for a list of components included in each base model 0 SKU. The NSC2U system SKUs are ordered using the Product Code as the order number.
Page 6
All Production SKUs are base model 0 SKUs (no processor, heatsink, memory, hard drive, power cord, operating system, or plug-in adapters are provided). Those components must be ordered separately as Accessories from Kontron or from third party vendors listed in the Tested Hardware and Operating System List (THOL).
Page 7
(refer to “Production Spares/Accessories List” in section III). o Components required are NSCRAID01W (NSC2U RAID5 Kit – includes the I- Button (license), battery cable) and the AXXMINIDIMM512 (512 MB Mini DIMM registered DDR-2 for RAID cache).
Page 8
III. Quad Port Bypass NIC Capability o The NSC2U is capable of supporting up to eight ports of front or rear- accessible Gigabit Ethernet (either Copper or Fiber) using Quad NIC adapters designed by Intel. Optional accessories are available to enable these features.
Page 9
They are orderable from Kontron or Intel using the indicated part numbers. The above 5300 and 5100 processor SKUs are also supported on the NSC2U for legacy purposes, and are orderable from Intel only.
III. Ordering NSC2U Spares/Accessories Below are the Spares parts and Accessories that may be ordered with the NSC2U system. Please read the following notes regarding this parts list. Spares: Any of these items may be ordered as ‘Spares’ for part replacement purposes.
Page 11
Drive (legacy) (drives purchased separately) Spares Power distribution NSCPWRDISBDW NSC2U Power Distribution Board board, with integrated wire harness NSC2U Front Panel IO Board with Board, set of front NSCFPIOBDLPW LED pipe panel light pipes NSCSASBSBDW NSC2U T5000PAL Server board Board...
Page 12
AXXBASRAIL13 Basic Slide Rail Kit (replaces AXXBASICRAIL) NOTE: Does not support Cable Management Arm. (orderable from Intel only – NOTE: Requires TMLREK01 to attach to NSC2U chassis MM# 899080 AXXHERAIL2 Fully extending Slide Rail Kit (replaces AXXHERAIL) (orderable from Intel only –...
The Quad Bypass adapters and the cabling/mounting kits come in packages of five units each. These kits include five of the NIC cables designed for the NSC2U system, as well as the escutcheons, cable management bracket, and associated screws to complete the installation of the Bypass adapter in the system.
Page 14
(order in Mounting Kit (Fiber) – 5 Pack cable management multiples bracket and screw of 5) Unpainted escutcheons for use NSC2U Escutcheons for Fiber Note: Five with (order in NSCESCFBR01W escutcheons are NSCCBLFNICFBRW ports (unpainted) – 48 Pack multiples...
Appendix A. Rack Mounting Options for 1U and 2U Communications Rack Mount Servers Rack mounting kits for 2-post or 4-post, 19-inch or 23-inch racks are offered for this product. For ordering details, refer to “Production Spares/Accessories List” in section III. Please refer to the tables below for the correct options to suit your needs. Although these mounts have been designed for industry standard racks, please consult with your Field Application or Sales Engineer before selecting racks for these servers.
Page 16
TMLCMOUNT21 The TMLCMOUNT21 kit mounts Communication Rack Mount Servers to a 2-post, central office type, 19- inch wide rack. This kit consists of L-shaped brackets that fasten to the sides of the server and to the rack. TMLCMOUNT21 12/20/2010 v 3.3 16 of 20...
Page 17
TMLPMOUNT41, TMLPMOUNT51 and TMLPMOUNT52 TMLPMOUNT41/51/52 series mounts Communication Rack Mount Servers to 2-post or 4-post racks. TMLPMOUNT41 and TMLPMOUNT51 are used for mounting servers on 19-inch wide racks. These racks are considered standard EIA (universal hole spacing) racks. TMLPMOUNT52 is used for mounting servers on 23-inch wide racks. These racks could be standard EIA (universal or wide hole spacing) or ETSI (European) racks.
Page 18
The diagrams above summarize the components and “slide-in rail-type” system of the TMLPMOUNT41. It can be adapted for a 2-post or 4-post installation. 12/20/2010 v 3.3 18 of 20...
Page 19
The main difference between the TMLPMOUNT41 and TMLPMOUNT51/52 series is that the TMLPMOUNT41 series uses a screw to lock the server in place using the Universal Mounting Bracket, whilst the TMLPMOUNT51/52 series has an additional Slide Pull-Out Locking feature. Universal Front Mounting Bracket on the TMLPMOUNT41 Slide Pull-Out Locking feature on the TMLPMOUNT51/52 12/20/2010 v 3.3...
Page 20
TMLPSLIDE01 The TMLPSLIDE01 is an accessory kit designed for use in conjunction with slide rails to produce a rack mounted serviceable server. The TMLPSLIDE01 kit contains two Universal Front Mounting Brackets that secure the server to the front of the rack. The sliding rails and optional mounting brackets required to mount the server must be purchased through the channel.
Need help?
Do you have a question about the NSC2U and is the answer not in the manual?
Questions and answers