Cpu Installation - DFI G486VPA User Manual

G486VPA

CPU Installation

The G486VPA is equipped with a 237-pin Zero
Insertion Force (ZIF) socket at location U27 of the
system board. This socket is designed for the easy
removal of the old CPU and the easy insertion of the
upgrade CPU. If you need to apply excessive force to
insert the CPU, the installation is being done incorrectly.
Make sure the jumpers are set correctly before applying
power, or you may damage the CPU or system board.
U27
Pin 1
Location of the ZIF Socket on the G486VPA System Board
Installation Overview u 2-27