DFI G486VPA User Manual page 96

PCI/ISA System Board
The First Installation Method
To install:
After booting your system from Windows NT setup
floppy drive, the "Welcome to Setup" screen will be
displayed. Press <Enter> to continue the setup proce-
dure.
After pressing <Enter>, you are prompted to choose a
setup method. The following two methods are given:
1. Express Setup
2. Custom Setup
Select the "Custom Setup" method by typing "C".
The system will start scanning for SCSI adapters. All
the SCSI adapters found will be displayed on the
screeen. If you want to configure additional SCSI adapt-
ers, type "S". Navigate the light bar to select the option
"Other (Requires disk provided by a hardware manufac-
turer)". Insert the "VT82C496G VLB IDE Device
Drivers" diskette into a floppy drive and press <Enter>.
Once the "VIA VT82C496G" device driver is recog-
nized by Windows NT, press <Enter> to continue the
setup.
After the "VIA VT82C496G" device driver setup, the
device driver will be displayed on the previous SCSI
adapters screen. Press <Enter> to continue Windows NT
Setup. Follow the Windows NT procedure to install the
rest of the Windows NT drivers.
4-10 u IDE Device Drivers