DFI G486VPA User Manual page 99

2. Choose the "Devices" menu.
3. Navigate the light bar to select the "vtdisk" Device
and then click the "Startup" button.
Note:
At this stage you can apply another method that would
allow you to disable the Windows NT driver. Instead of
selecting "vtdisk" from the "Devices" menu, you can
choose "OEMSCSI". Click the "Startup" button and
then proceed with step four.
4. Change "Startup Type" from "Boot" to "Disable",
then click the "OK" button to complete the proce-
dure.
G486VPA
IDE Device Drivers u 4-13