DFI G486VPA User Manual page 64

PCI/ISA System Board
Floppy Disk Drive Controller
The G486VPA system board has a built-in floppy disk
controller that supports two standard floppy disk drives.
You can install any 360KB/720KB/1.2MB/1.44MB/
2.88MB floppy disk drives.
Connecting the Floppy Disk Cable
The Floppy Disk Connector on the
Step 1
Install the 34-pin header connector into the floppy disk
connector (J5) on the system board. The colored edge of
the ribbon should be aligned to pin 1 of the J5 connec-
tor.
2-54 u Installation Overview
G486VPA System Board