DFI G486VPA User Manual page 88

PCI/ISA System Board
The Main Screen appears allowing you to choose one of
1. <F1>: Help - Press <F1> to get a help message
2. <Enter>: Continue - Pressing <Enter> lets you con-
tinue the setup utility.
3. <Esc>: Quit - Press <Esc> to exit the setup utility.
Note that if you press <Enter> while the installation
is in progress, you will exit the installation proce-
dure and the IDE drivers will not be successfully
installed.
Press <Enter> to proceed with the installation, then
select one of the following options:
1. <F1>: Help - Press <F1> to get a help message
2. <F2>: Full Installation - When chosen, this option lets
you install all of the VT82C496G VLB IDE device
drivers. These are: Windows and NetWare drivers.
3. <F3>: Customized Installation - This option allows
you to choose which one of the VT82C496G VLB
IDE device drivers you want to install. Refer to the
following chapters for more information.
4. <Esc>: Quit - Press <Esc> to exit the setup utility or
to discontinue the installation process.
Press <F2> to proceed with the Full Installation. When
it has been completed, press <Esc> to exit the Utility.
4-2 u IDE Device Drivers
the following options: