8.4.2
INSTALLATION AND REMOVAL OF BACK WINDOW FRAME
Installation of back window frame:
•
Start by inserting the tabs of the door in
the opening located at the bottom of the
appliance (figure 8.4.2.Detail B)
•
Tilt the top of the door and slightly lift it
(without removing the bottom tabs from
their slots) to positioning the hook (Figure
8.4.2 Detail A) in place.
•
Push down to secure it in place.
Removal of back window frame:
•
Raise vertically to disengage the hook
(Figure 8.4.2 Detail).
•
Pull outward the appliance
•
Disengage the bottom tabs.(Figure 8.4.2 Detail B)
8.5
THERMAL INSULATION PANEL INSTALLATION
Corresponding window frame must be removed to install the insulation box (see 8.4 " INSTALLATION AND
REMOVAL OF SIDE AND BACK WINDOW FRAME") to remove the window frame.
Depending of your configuration, you have to a variable quantity of thermal insulation panel; see the next chart
to know how many.
Type
INSERT
PENINSULE
LEFT CORNER
RIGHT CORNER
PANORAMIC
CENTRAL
SEE THRU
Model
LOO / RGR-25
MISTRAL / RGP-25
AUSTER / RGCG-25
MOUSSON / RGCD-25
SIROCCO / RGP-25
PAMPERO / RGC-25
SUROIT / RGV-25
Figure 8.4.2
Side thermal
Back thermal insulation
insulation
panel
2
1
1
1
0
0
2
panel
1
0
1
1
1
0
0
63