JTS UF-20R Product Manual page 28

9. Light Time: the setting of the backlight time
(1) Press ▲、▼ to select backlight time. Press SET to enter into "Light
Time" screen.
(2) Press ▲、▼ to select the backlight time; you can select "closed", "5~30
seconds"(having 5 seconds as the unit of change) or "constant light. "
The longer the backlight time, the shorter the usage time of the battery.
10.User Name: the setting of the user' s name
(1) Press ▲、▼ to select user name. Press SET to enter into "User Name"
screen for the setting of the user' s name.
(2) Press ▲、▼ to select the characters. After confirmation, press SET to
select the next character. If no character is needed, select "space". After confir-
mation, press SET to save the setting; there is a total of 10 characters for setting.
11. Reset
(1) Press ▲、▼ to select reset. Press SET to enter into "Reset" screen.
(2) Press ▲to select confirm as to reset the internal information of the hand-
held transmitter. Press SET to save the setting.
(3) Press ▼to select cancel as to cancel the reset setting. Press SET to save the
setting.
51
Professional Wideband True Diversity System (75MHz)
Device ID
Remoset
RF Power
Contrast
Light Time
Light Time
10 Sec.
User Name
Reset
KeyLock
Exit
User Name
U F-20TB
Char: 1/10
The charater in the
process of setting
A total of 10
characters
for setting
User Name
Reset
KeyLock
Exit
All stored
data will be
erased.
Yes / NO
12. Key Lock: setting of the keypad lock
(1) Press ▲、▼ to the keypad lock. Press SET to enter into "key Lock"
screen for keypad lock setting.
(2) Press ▲、▼ to select lock "ALL" , "Set & Power" only or lock "OFF".
Press SET to save the setting.
ALL: All the buttons are locked as to prevent any misoperation touch.(include
Mute switch)
Set & Power: Only funtion buttons are locked, Mute switch will not be locked.
(3) Press ▲、▼ to select lock off. Press SET to save the setting.
(4) To unlock: press SET for two seconds and it will directly go into the key
lock screen. Press ▼to select OFF. Press SET to save the setting.
13. Exit
Press ▲、▼ to select exit setting. Press SET to go back to the main screen.
User Name
Reset
KeyLock
Exit
KeyLock
ALL
Set & Power
OFF
KeyLock
ALL
Set & Power
OFF
KeyLock
ALL
Set & Power
OFF
Press Set
for 2 Sec.
to unlock
keypad.
User Name
Reset
KeyLock
Exit
52