JTS UF-20R Product Manual page 16

5-1-2. Receiver connection method // UF-20S
1. UF-20S output to a mixer or an amplifier:
Audio cable: XLR or Ø 6.3mm audio cable, one end connects to audio output of UF-20S "AF
OUTPUT BALANCED", while the other end connects to audio input of a mixer or an ampli-
fier.
2. Connect to power
Connect to AC/DC adapter: one end connects to receiver "DCV INPUT", while the other
end connects to AC power receptacle.
32
Amplifier
AC/DC transformer
Power receptacle
Figure 1
27
Professional Wideband True Diversity System (75MHz)
Step 1
Audio output
Freq.Range:
Made in Taiwan
12V
Power supply
Step 2
5-2 Cascading of AC power cable and antenna (UF-20R Only)
It is allowed to cascade power and antennas for 10 units.
Power socket
Freq.Range:
CAUTION
POWER
RISK OF ELECTRIC SHOCK DO NOT OPEN
100V~240VAC~ 1856
50/60Hz, 2A Made in Taiwan
Freq.Range:
CAUTION
POWER
RISK OF ELECTRIC SHOCK DO NOT OPEN
100V~240VAC~ 1856
50/60Hz, 2A Made in Taiwan
10 units More UF-20Rs...
Freq.Range:
CAUTION
POWER
RISK OF ELECTRIC SHOCK DO NOT OPEN
100V~240VAC~ 1856
50/60Hz, 2A Made in Taiwan
Freq.Range:
CAUTION
POWER
RISK OF ELECTRIC SHOCK DO NOT OPEN
100V~240VAC~ 1856
50/60Hz, 2A Made in Taiwan
Antenna B In Antenna A In
RF B Out 12V out RF A Out 12V out
Antenna B In Antenna A In
RF B Out 12V out RF A Out 12V out
Antenna B In Antenna A In
RF B Out 12V out RF A Out 12V out
Antenna B In Antenna A In
RF B Out 12V out RF A Out 12V out
28