JTS UF-20R Product Manual page 19

#2. Clear Group: delete a group defined by us er
(1) Rotate the rotary switch to "2. Clear Group. " Push the
rotary switch to enter the "Clear Group" screen.
(2) Rotate the rotary switch to select the group to be deleted
and push the rotary switch.
Select "Confirm" and all the channels and frequencies of
that group is returned to "---.---MHz. " Select confirm or
cancel and push the rotary switch.
#3. Return: return to main menu
Rotate the rotary switch to "3. Return, " and push the switch to
return to the main menu.
4. Scan: scan for channels
(1) Rotate the rotary switch to "4. Scan. " Push the rotary switch
(or SETUP) to enter the channel scanning screen.
#1. All Groups: scan all groups
(1) Rotate the rotary switch to "1. All Groups. " Push the rotary
switch (or SETUP) to enter the menu.
(2) Enter the "All Groups" (push EXIT to go back up a level)
and push the rotary switch to scan.
(3) The progress in % is shown on the screen during the scan-
ning. To stop scanning, just push EXIT.
(4) The display goes to the "2. Result List" screen automatically
after the scanning is completed. User may select the list in
the menu.
The user may view the scan result in the screen. Rotate the
rotary switch to select an available channel. Push SETUP
to save settings.
33
Professional Wideband True Diversity System (75MHz)
1. Custom Group
2. Clear Group
3. Return
Group: U1
Rotary to select
Push "Entrer" to clear
Push "Exit" to return
Group "U1" will be cleared
continues?
Yes NO
1. Custom Group
2. Clear Group
3. Return
M 1. Frequency
E 2.Group/Channel
N 3.User Group
U 4. Scan
1. All Groups
2. Result List
3. Current Group
4. Return
Scan All Groups
Press Setup or Enter to
start scan.
Press Exit to quit.
Scan All Groups
Scanning... 2%
#2. Result List: view the scan result list
Rotate the rotary switch to "2. Result List. " Push the rotary
switch and enter the menu screen to view the result. Select an
available channel and push SETUP to save the settings.
#3. Current Group: scan a single group
(1) Rotate the rotary switch to "3. Current Group. " Push the
rotary switch to enter the menu screen.
(2) Push the rotary switch to start scanning a single group.
(3) The display shows OK after scanning; for "every push" of
the rotary switch, the unit starts to scan the next group.
Select and push SETUP to save the setting. Push EXIT to
go back to the previous level.
#4. Return: return to main menu
Rotate the rotary switch to "4. Return. " Push the rotary switch
to return to the main menu.
5. Squelch: adjust the receiver sensitivity
(1) Rotate the rotary switch to "5. Squelch. " Push the rotary
switch (or SETUP) to enter the adjustment menu.
(2) Rotate the rotary switch to adjust the sensitivity. 0dB is the
standard value. Push SETUP to save the setting. The higher
the value, the lower the receiver sensitivity, and the lower
the value, the higher the receiver sensitivity.
1. All Groups
2. Result List
3. Current Group
4. Return
Scan Result List
G: 1 CH: 1
Open Channel : 48
1. All Groups
2. Result List
3. Current Group
4. Return
Scan Current Group
G: 1 CH:1
Scan Current Group
G: 1 CH: 1 OK
Press Setup to Save.
1. All Groups
2. Result List
3. Current Group
4. Return
M 5. Squelch
E 6. Device ID
N 7. Mic Config
U 8. Volume
Setup Squelch
0
34