JTS UF-20R Product Manual page 22

b. Antenna Power: power settings for antenna booster (for
antenna A (or B) IN jack)
(1) Rotate the rotary switch to "b. Antenna Power. " Push the
rotary switch (or SETUP) to enter the setting menu.
(2)Rotate the rotary switch to select:
ON: voltage output +12VDC
OFF: voltage output 0V
Push SETUP to save the setting.
c. User Name: user name settings
(1) Rotate the rotary switch to "c. User Name. " Push the rotary
switch (or SETUP) to enter the setting menu.
(2) Rotate the rotary switch to select the desired characters.
Push the rotary switch to confirm the selection, and the
screen jumps to the next character to be selected. Select
"blank" for positions where no character is needed. Push
SETUP to save the setting. The user name could contain
up to 10 characters.
Push SETUP to save the setting.
d. Contrast: screen contrast settings
(1) Rotate the rotary switch to "d. Contrast. " Push the rotary
switch (or SETUP) to enter the setting menu.
(2) Rotate the rotary switch to make the screen darker or
brighter. Push SETUP to confirm and save the setting. The
higher the value, the darker the color tone.
There are 7 levels available.
Push SETUP to save the setting.
39
Professional Wideband True Diversity System (75MHz)
M 9. Equalizer
E a. Output Level
N b. Antenna Power
U c. User Name
Antenna Power
ON
OFF
M 9. Equalizer
E a. Output Level
N b. Antenna Power
U c. User Name
User Name
UF-20R
Char:1/10
Up to 10
characters
are allowed
Current character
to be selected
M c. User Name
E d. Contrast
N e. Reset
U f. Key Lock
Setup Contrast
3/7
e. Reset
(1) Rotate the rotary switch to "e. Reset" Push the rotary switch
(or SETUP) to enter the setting menu.
*Once reset, all the settings will be returned to factory
defaults. If REMOSET is needed, please check that the ID
is the same as that of transmitter.
(2) Push SETUP to reset.
f. Key Lock: to set the keypad lock
(1) rotate the rotatory switch to "f. Key Lock" and press the
rotatory switch (or select SETUP) to enter into the setting
screen.
(2) Rotate the rotatory switch to select "Lock ON". After con-
firmation, select SETUP to save the setting; "Lock ON"can
lock up the keypad of the receiver panel and prevent
misoperation touch.
Right side receiver can lock up: REMOSET, SETUP, rota-
tory switch, EXIT and POWER.
Left side receiver can lock up: REMOSET, SETUP, rota-
tory switch and EXIT.
(3) After KEYPAD LOCK, press any of the keypad the screen
will show the Unlocked information.
(4) Lock OFF: press SETUP for two seconds and enters
directly into "KeyLock" setting screen. Rotate the rotatory
switch to select "Lock OFF" and press SETUP to save the
keypad setting.
M c. User Name
E d. Contrast
N e. Reset
U f. Key Lock
This will erase all data
from receiver's Internal
Storage.
Press 2 sec to Reset
S
M c. User Name
E d. Contrast
N e. Reset
U f. Key Lock
Setup KeyLock
Lock ON
Lock OFF
Press Setup for 2 Sec.
to unlock keyPad
Setup Key Lock
Lock On
Lock Off
40