JTS UF-20R Product Manual page 21

(2) Rotate the rotary switch to select and push the switch to
check the selection; REMOSET only synchronizes on
checked selections.
□ Frequency
□ Sensitivity
□ Attenuate
□ Low Cut
□ RF Power
□ Key lock
□ UserName
□ Save and Exit
□ Exit Without Save
Select and push SETUP to save the settings.
*At least one item must be selected.
(7. Return: to main menu
Rotate the rotary switch to "7. Return" and push the switch
to return to main menu.
8. Volume: volume adjustment
(1) Rotate the rotary switch to "8. Volume. " Push the rotary
switch (or SETUP) to enter the volume adjustment menu.
(2) Rotate the rotary switch to locate the desired volume from
Mute, -50dB to 0dB. Push SETUP to save the setting.
37
Professional Wideband True Diversity System (75MHz)
4. RF Power
5. Kry Lock
6. Remoset Config
7. Return
M 5. Squelch
E 6. Device ID
N 7. Mic Config
U 8. Volume
Setup Volume
-10dB
M 9. Equalizer
E a. Output Level
N b. Antenna Power
U c. User Name
9. Equalizer: equalizer settings
(1) Rotate the rotary switch to "9. Equalizer. " Push the rotary
switch (or SETUP) to enter the setting menu.
(2) Rotate the rotary switch to select one of the following:
Equalizer deactivated
Decrease low frequency gain
Increase high frequency gain
Decrease low frequency gain and increase high frequency
gain
Push SETUP to save the setting.
a. Output Level: XLR audio output level setting
(1)Rotate the rotary switch to "a. Output Level. " Push the
rotary switch (or SETUP) to enter the setting menu.
(2) Rotate the rotary switch to choose line or mic level:
When "Mic. " is selected, the volume of XLR audio output
drops by "-20dB. "
Push SETUP to save the setting.
M 9. Equalizer
E a. Output Level
N b. Antenna Power
U c. User Name
Setup Equalizer
Setup Equalizer
Setup Equalizer
Setup Equalizer
M 9. Equalizer
E a. Output Level
N b. Antenna Power
U c. User Name
Output Level
Line
Mic.
38