6. Install the second processor.
Figure 10-3. Installing a second processor:
7. Reassemble the workstation, and connect the power cord to the
grounded AC outlet and to the workstation.
IMPORTANT:
and to the workstation, DO NOT turn the power button on if the Power LED is
a steady amber color. A steady amber color indicates that the processor is
not seated properly. Disconnect the power cord and reseat the processor.
IMPORTANT:
four thumbscrews.
Upgrading the Processor
To upgrade the processor, follow the installation procedures included with the
processor upgrade kit.
3
2
1
two release latches, and
After connecting the power cord to the grounded AC outlet
When replacing the side access panel, be sure to tighten all
2
inserting processor,
tightening the middle screw
Compaq Professional Workstation SP700 Reference Guide
10-3
closing the