Mitsubishi Electric GRANDIS OXPE10E1 Owner's Manual page 68

Table of Contents

Advertisement

WARNING
l
If the SRS warning lamp comes on, we rec-
ommend you to have the vehicle inspec-
ted by a MITSUBISHI MOTORS Author-
ized Service Point as soon as possible.
l
Please observe the following instructions
to ensure that the driver's seat position
sensor can sense the seat position correct-
ly. Otherwise, the dual stage airbags may
not operate correctly.
• Adjust the seat to the correct position,
and sit correctly with your back
against the seatback.
Refer to "Front seat" on page 2-05.
• Do not have the seatback reclined
more than necessary when driving.
• Do not place metallic objects or lug-
gage under the seat.
l
If the vehicle suffers a severe impact, we
recommend you to have the sensor inspec-
ted by a MITSUBISHI MOTORS Author-
ized Service Point as soon as possible.
Front passenger's airbag ON-OFF
switch
E00410100214
The front passenger's airbag ON-OFF switch can
be used to disable the front passenger's airbag. If
you have a rearward facing child restraint system
that cannot be fitted to any seat other than the front
passenger seat, be sure to turn OFF the front passen-
ger's airbag ON-OFF switch before using it. (Refer
to "To turn an airbag off" on page 2-33.)
The front passenger's airbag ON-OFF switch is lo-
cated in the glove box.
WARNING
l
To reduce risk of serious or fatal injury:
• Always remove the key from the igni-
tion switch before operating a front
passenger's airbag ON-OFF switch.
Failure to do so could adversely affect
the airbag performance.
• Wait at least 60 seconds to operate the
front passenger's airbag ON-OFF
switch after turning the ignition
switch
from
"ON"
position
"LOCK" position.
The SRS airbag system is designed to
retain enough voltage to deploy the air-
bag.
Seat and seat belts
WARNING
• Always remove the key from the front
passenger's airbag ON-OFF switch af-
ter operating that switch. Failure to
do so could lead to improper position
of
the
front
passenger's
ON-OFF switch.
To turn an airbag off
To turn an airbag off, follow these steps:
1. Insert the key into the key opening of the ap-
propriate front passenger's airbag ON-OFF
switch, and turn that airbag ON-OFF switch
to the "OFF" position.
2. Remove the key from the key opening of that
front passenger's airbag ON-OFF switch.
3. Insert the key into the ignition switch, and
turn the ignition to the "ON" position.
to
airbag
E00410600251
2
2-33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents