Jacking Up The Vehicle - Mitsubishi Electric GRANDIS OXPE10E1 Owner's Manual

3. Retract the jack, then remove it from its stor-
age location.
To store
1. Retract the jack, then return it to its original
position.
To retract
To expand
2. Expand the jack to lock it securely in place.
3. Return the luggage floor board to its original
position.

Jacking up the vehicle

E00801001393
1. Park the vehicle on level and stable ground.
2. Set the parking brake firmly.
3. On vehicles with M/T, turn the ignition key
to the "LOCK" position, move the gearshift
lever to the "R" (Reverse) position.
On vehicles with A/T, move the selector lev-
er to the "P" (PARK) position, turn the igni-
tion key to the "LOCK" position.
4. Turn on the hazard warning flashers and set
up a warning triangle, flashing signal lamp,
etc., at an adequate distance from the vehi-
cle, and have all your passengers leave the ve-
hicle.
5. To prevent the vehicle from rolling when it
is raised on the jack, place chocks or blocks
(A) at the tyre that is diagonally opposite
from the tyre (B) you are changing.
For emergencies
WARNING
l Be sure to apply chocks or blocks to the
correct tyre when jacking up the vehicle.
If the vehicle moves while jacked up, the
jack could slip out of position, leading to
an accident.
NOTE
l The chocks shown in the illustration do not
come with your vehicle. It is recommended
that you keep one in the vehicle for use if nee-
ded.
l
If chocks are not available, use stones or any
other objects that are large enough to hold
the wheel in position.
6. Place the jack under one of the jacking
points (C) shown in the illustration. Use the
jacking point closest to the tyre you wish to
change.
6
6-07