Mitsubishi Electric GRANDIS OXPE10E1 Owner's Manual page 41

Seat and seat belts
To recline the seatback
In order to recline the seatback, lean forward slight-
ly, pull the seatback lock lever up, and then lean
backward to the desired position and release the lev-
er. The seatback will lock in that position.
2
CAUTION
l The reclining mechanism of the seatback
is spring loaded, causing it to return to
the vertical position when the lock lever
is operated. When using the lever, sit
close to the seatback or hold it with your
hand to control its return motion.
2-06
To adjust seat height
E00400600610
Adjust the seat cushion height by repeatedly operat-
ing the lever.
1- Raise
2- Lower
Armrest*
To adjust the armrest angle, tip the armrest forward
and then raise it to the desired position.
To return the armrest to its original position, raise
it backward.
NOTE
E00400700871 Do not stand or sit on the armrest. It could break.
Heated seats*
The heated seats can be operated with the ignition
switch in the "ON" position.
1-Heater high (for quick heating).
E00400900365 2-Heater off.
3-Heater low (to keep the seat warm).
The indication lamp (A) will illuminate while the
heater is on.
E00401100667