Mitsubishi Electric GRANDIS OXPE10E1 Owner's Manual page 62

Installing a child restraint system to
the lower anchorage (ISOFIX child re-
straint mountings)
E00408900042
Your vehicle's second seat is fitted with lower an-
chorages for attaching a child restraint system with
ISOFIX mountings.
6-person seat
7-person seat
Child restraint system with ISOFIX
mountings
E00409000532
The child restraint system is designed only for
seats that incorporate lower anchorages. Retain the
child restraint system using the lower anchorages.
It is not necessary to retain the child restraint sys-
tem using the vehicle's seat belts. Only a
MITSUBISHI MOTORS genuine child restraint
system can be used.
Genuine parts No.: MZ313045
ECE No.: E1-04301133
A: Child restraint system connectors
WARNING
l If a child restraint system other than a
MITSUBISHI MOTORS genuine one is
used, it may not be properly retained and
the child could be seriously injured as a
result. Use only a MITSUBISHI
MOTORS genuine child restraint system.
Seat and seat belts
To install
WARNING
l If there is any foreign material in or
around the connectors, remove it before
installing the child restraint system. Also,
make sure the seat belt is away from, not
looped through or otherwise interfering
with, the child restraint system. If foreign
matter is not removed and/or the seat
belt interferes with the child restraint sys-
tem, the child restraint system will not be
secured properly and could move for-
ward in the event of sudden braking or a
collision, seriously injuring the child and
possibly other vehicle occupants.
l Use the top tether strap when fitting a
child restraint system with ISOFIX
mountings.
Otherwise, the child could be seriously in-
jured in the event of hard braking or a col-
lision.
l When the vehicle is moving do not adjust
the seat where the child restraint system
is installed.
1. Slide the second seats to the fully backward
position. (Refer to "To adjust forward or back-
ward" on page 2-07.)
2
2-27