Mitsubishi Electric GRANDIS OXPE10E1 Owner's Manual page 149

For pleasant driving
Blower speed selection switch
When the blower speed selection switch or AUTO
switch is pressed, the air conditioning (cooling and
dehumidifying functions) starts operating. When
the OFF switch (A) is pressed, it stops.
The indication lamp (B) for the selected blower
speed illuminates.
NOTE
5
l
The blower speed is memorized when the en-
gine is shut down.
If the battery is disconnected and reconnec-
ted, however, the memory is erased and the
blower speed is automatically set to the
"OFF" position.
Temperature control lever
The temperature control lever is used to adjust the
air temperature.
5-10
Move it rightward to increase the temperature and
leftward to reduce the temperature.
E00706300104
1- Low
2- High
NOTE
l
The mode changes in accordance with the air
temperature. (Refer to "Changing the rear
mode selection" on page 5-04.)
l When the engine coolant temperature is ex-
tremely low (for example, in extremely cold
weather), moving the temperature control lev-
er has no effect on the air temperature.
E00706400059
Operating the system in automatic
mode
E00706800141
1. Press the AUTO switch (A).
2. Set the desired temperature using the temper-
ature control lever (B). The temperature can
be set within a range from the minimum to
the maximum.
NOTE
l
Adjust the temperature to the desired level us-
ing the temperature control lever (centred for
reference).
l When the engine coolant temperature is ex-
tremely low (for example, in extremely cold
weather), moving the temperature control lev-
er has no effect on the air temperature.