Mitsubishi Electric GRANDIS OXPE10E1 Owner's Manual page 147

For pleasant driving
NOTE
l
Set the temperature at about 22 under normal
conditions.
l
While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial. To prevent the windscreen and win-
dows from fogging up, the ventilator mode
will be changed to " " and the blower
speed will be reduced.
l If the blower speed selection dial, air condi-
tioning switch, mode selection dial, or air se-
lection switch is operated while the system is
operating in the AUTO mode, the activated
function overrides the corresponding func-
tion of automatic control. All other functions
remain under automatic control.
Operating the system in manual air
mode
5
Blower speed and ventilator mode may be control-
led manually by setting the blower speed selection
dial and the mode selection dial to the desired posi-
tions. To return to automatic operation, set the dials
to the "AUTO" position.
Demisting of the windscreen and door windows
CAUTION
l For safety, make sure you have a clear
view through all the windows.
5-08
To remove frost or mist from the windscreen and
door windows, use the mode selection dial ("
or " ").
For ordinary demisting
Use this setting to keep the windscreen and door
windows clear of mist, and to keep the leg area heat-
ed (when driving in rain or snow).
E00704200011
1. Set the air selection switch (A) to the outside
position.
2. Set the mode selection dial to the "
tion.
3. Select your desired blower speed by turning
the blower speed selection dial.
4. Select your desired temperature by turning
E00704300546
the temperature control dial.
5. Push the air conditioning switch (B).
For quick demisting
"
1. Set the mode selection dial to the "
tion.
2. Set the blower to the maximum speed.
3. Set the temperature to the highest position.
NOTE
l
While the mode selection dial is set to the
" " position, the air conditioning will oper-
ate automatically and the outside air position
" posi-
will also be selected automatically.
l Do not set the temperature control dial to the
max. cool position. Cool air will blow
against the window glasses and form mist on
them.
" posi-